Poster une réponse à un sujet: [HD XP plus bootable] c'est mal barré?
Attention, ce sujet est un sujet ancien (5827 jours sans réponse)
blietaer
phil>le bios de l'ancienne machine voit encore tous les paramètres de l'hd...
jc> ouais je crois que je suis parti un peu vite du pressario, vais retourner dessus
jc> ouais je crois que je suis parti un peu vite du pressario, vais retourner dessus
Jean-Christophe
j'essayerai quand même sur une machine windows
Sur un liveCD dans le pressario d'origine?
![:spamafote: :spamafote:](images/smileys/spamafote.gif)
Sur un liveCD dans le pressario d'origine?
didix
Composte-le à la française, comme les billets de train et métro
![:oh: :oh:](images/smileys/oh.gif)
![:spamafote: :spamafote:](images/smileys/spamafote.gif)
philfr
Une autre démarche avant de le composter ?
Ne pollue pas ton compost, et porte-le dans un point récupel
![:spamafote: :spamafote:](images/smileys/spamafote.gif)
Quand tu dis qu'il est reconnu par son PC, ça veut dire quoi ?
blietaer
Un pote qui fait encore confiance, en 2008, à uniquement son HD pour TOUTES ses données, vient d'en payer le prix fort: le XP ne boot plus.
Il semble pourtant encore détecté au sein de son PC (compaq pressario) mais pas dans les autres PC (linux) où je le teste...
Enfin, je le mets dans un casier-USB IDE externe et le monte sous Linux (kubuntu) :
[ 118.764755] usb 3-6: new high speed USB device using ehci_hcd and address 2
[ 118.883998] usb 3-6: configuration #1 chosen from 1 choice
[ 118.933190] usbcore: registered new interface driver libusual
[ 118.974946] Initializing USB Mass Storage driver...
[ 118.980237] scsi4 : SCSI emulation for USB Mass Storage devices
[ 118.980864] usbcore: registered new interface driver usb-storage
[ 118.980869] USB Mass Storage support registered.
[ 118.982842] usb-storage: device found at 2
[ 118.983466] usb-storage: waiting for device to settle before scanning
[ 124.779421] scsi 4:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 124.790632] sd 4:0:0:0: [sdb] 156285104 512-byte hardware sectors (80018 MB)
[ 124.791600] sd 4:0:0:0: [sdb] Write Protect is off
[ 124.791600] sd 4:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 124.791600] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 124.797598] sd 4:0:0:0: [sdb] 156285104 512-byte hardware sectors (80018 MB)
[ 124.797598] sd 4:0:0:0: [sdb] Write Protect is off
[ 124.797598] sd 4:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 124.797598] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 124.797598] sdb:<6>sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 125.102897] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 125.102932] sdb1 sdb2 sdb3
[ 125.103117] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 125.103179] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 125.103469] usb-storage: device scan complete
[ 125.421863] sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 125.421871] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 125.799874] sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 125.799874] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 126.178906] sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 126.178906] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 161.469298] usb 3-6: reset high speed USB device using ehci_hcd and address 2
[ 197.198957] usb 3-6: reset high speed USB device using ehci_hcd and address 2
[ 205.113731] usb 3-6: USB disconnect, address 2
[ 205.113933] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.113940] end_request: I/O error, dev sdb, sector 104
[ 205.113947] Buffer I/O error on device sdb, logical block 13
[ 205.113957] Buffer I/O error on device sdb, logical block 14
[ 205.113961] Buffer I/O error on device sdb, logical block 15
[ 205.113965] Buffer I/O error on device sdb, logical block 16
[ 205.113969] Buffer I/O error on device sdb, logical block 17
[ 205.113973] Buffer I/O error on device sdb, logical block 18
[ 205.113977] Buffer I/O error on device sdb, logical block 19
[ 205.113982] Buffer I/O error on device sdb, logical block 20
[ 205.113986] Buffer I/O error on device sdb, logical block 21
[ 205.113990] Buffer I/O error on device sdb, logical block 22
[ 205.114080] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.114085] end_request: I/O error, dev sdb, sector 344
[ 205.114159] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.114163] end_request: I/O error, dev sdb, sector 104
[ 205.114714] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.114714] end_request: I/O error, dev sdb, sector 104
[ 209.197783] usb 3-5: new high speed USB device using ehci_hcd and address 3
[ 209.343176] usb 3-5: configuration #1 chosen from 1 choice
[ 209.345244] scsi5 : SCSI emulation for USB Mass Storage devices
[ 209.368063] usb-storage: device found at 3
[ 209.368070] usb-storage: waiting for device to settle before scanning
[ 215.287874] scsi 5:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 215.296745] sd 5:0:0:0: [sdb] 156276912 512-byte hardware sectors (80014 MB)
[ 215.297495] sd 5:0:0:0: [sdb] Write Protect is off
[ 215.297499] sd 5:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 215.297503] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 215.303015] sd 5:0:0:0: [sdb] 156276912 512-byte hardware sectors (80014 MB)
[ 215.303832] sd 5:0:0:0: [sdb] Write Protect is off
[ 215.303836] sd 5:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 215.303840] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 215.303845] sdb:<6>sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 215.583105] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 215.888353] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 215.888353] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 216.261124] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 216.261124] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 216.261124] unknown partition table
[ 216.261124] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 216.261124] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 216.261184] usb-storage: device scan complete
[ 216.553482] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 216.553482] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 216.904131] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 216.904131] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 217.230144] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 217.230144] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 217.515617] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 217.515617] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 253.403340] usb 3-5: reset high speed USB device using ehci_hcd and address 3
[ 270.186882] sd 5:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 270.186892] end_request: I/O error, dev sdb, sector 40
[ 270.186899] __ratelimit: 39 messages suppressed
[ 270.186902] Buffer I/O error on device sdb, logical block 5
[ 270.186908] Buffer I/O error on device sdb, logical block 6
[ 270.186912] Buffer I/O error on device sdb, logical block 7
[ 270.186916] Buffer I/O error on device sdb, logical block 8
[ 270.186920] Buffer I/O error on device sdb, logical block 9
[ 270.186924] Buffer I/O error on device sdb, logical block 10
[ 270.186928] Buffer I/O error on device sdb, logical block 11
[ 270.194069] usb 3-5: USB disconnect, address 3
[ 270.194804] sd 5:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
[ 270.194813] end_request: I/O error, dev sdb, sector 156276904
[ 300.611626] usb 3-5: new high speed USB device using ehci_hcd and address 4
[ 300.729368] usb 3-5: configuration #1 chosen from 1 choice
[ 300.734974] scsi6 : SCSI emulation for USB Mass Storage devices
[ 300.742258] usb-storage: device found at 4
[ 300.742845] usb-storage: waiting for device to settle before scanning
[ 306.002680] scsi 6:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 306.009810] sd 6:0:0:0: [sdc] 156244144 512-byte hardware sectors (79997 MB)
[ 306.009811] sd 6:0:0:0: [sdc] Write Protect is off
[ 306.009811] sd 6:0:0:0: [sdc] Mode Sense: 08 00 00 00
[ 306.009811] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 306.015810] sd 6:0:0:0: [sdc] 156244144 512-byte hardware sectors (79997 MB)
[ 306.015876] sd 6:0:0:0: [sdc] Write Protect is off
[ 306.015879] sd 6:0:0:0: [sdc] Mode Sense: 08 00 00 00
[ 306.015881] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 306.015885] sdc:<6>sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 306.275864] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 306.542500] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 306.542500] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 306.792531] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 306.792542] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 306.792985] unknown partition table
[ 306.792985] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 306.792985] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 306.798018] usb-storage: device scan complete
[ 307.095353] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 307.095365] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 307.406725] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 307.406737] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 307.693544] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 307.693553] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.001745] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.001745] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.309951] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.309951] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.578830] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.578830] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.915038] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.915038] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 309.203257] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 309.203257] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 309.499458] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 309.499458] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 309.815746] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 309.815746] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 310.125538] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 310.125538] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
Inutile de vous dire que ni le sdb ni le sdc promis par dmesg ci-dessus apparaissent (ou alors disparaissent aussi tot..)
Une autre démarche avant de le composter ?
Il semble pourtant encore détecté au sein de son PC (compaq pressario) mais pas dans les autres PC (linux) où je le teste...
Enfin, je le mets dans un casier-USB IDE externe et le monte sous Linux (kubuntu) :
[ 118.764755] usb 3-6: new high speed USB device using ehci_hcd and address 2
[ 118.883998] usb 3-6: configuration #1 chosen from 1 choice
[ 118.933190] usbcore: registered new interface driver libusual
[ 118.974946] Initializing USB Mass Storage driver...
[ 118.980237] scsi4 : SCSI emulation for USB Mass Storage devices
[ 118.980864] usbcore: registered new interface driver usb-storage
[ 118.980869] USB Mass Storage support registered.
[ 118.982842] usb-storage: device found at 2
[ 118.983466] usb-storage: waiting for device to settle before scanning
[ 124.779421] scsi 4:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 124.790632] sd 4:0:0:0: [sdb] 156285104 512-byte hardware sectors (80018 MB)
[ 124.791600] sd 4:0:0:0: [sdb] Write Protect is off
[ 124.791600] sd 4:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 124.791600] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 124.797598] sd 4:0:0:0: [sdb] 156285104 512-byte hardware sectors (80018 MB)
[ 124.797598] sd 4:0:0:0: [sdb] Write Protect is off
[ 124.797598] sd 4:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 124.797598] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 124.797598] sdb:<6>sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 125.102897] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 125.102932] sdb1 sdb2 sdb3
[ 125.103117] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 125.103179] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 125.103469] usb-storage: device scan complete
[ 125.421863] sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 125.421871] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 125.799874] sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 125.799874] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 126.178906] sd 4:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 126.178906] sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 161.469298] usb 3-6: reset high speed USB device using ehci_hcd and address 2
[ 197.198957] usb 3-6: reset high speed USB device using ehci_hcd and address 2
[ 205.113731] usb 3-6: USB disconnect, address 2
[ 205.113933] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.113940] end_request: I/O error, dev sdb, sector 104
[ 205.113947] Buffer I/O error on device sdb, logical block 13
[ 205.113957] Buffer I/O error on device sdb, logical block 14
[ 205.113961] Buffer I/O error on device sdb, logical block 15
[ 205.113965] Buffer I/O error on device sdb, logical block 16
[ 205.113969] Buffer I/O error on device sdb, logical block 17
[ 205.113973] Buffer I/O error on device sdb, logical block 18
[ 205.113977] Buffer I/O error on device sdb, logical block 19
[ 205.113982] Buffer I/O error on device sdb, logical block 20
[ 205.113986] Buffer I/O error on device sdb, logical block 21
[ 205.113990] Buffer I/O error on device sdb, logical block 22
[ 205.114080] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.114085] end_request: I/O error, dev sdb, sector 344
[ 205.114159] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.114163] end_request: I/O error, dev sdb, sector 104
[ 205.114714] sd 4:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 205.114714] end_request: I/O error, dev sdb, sector 104
[ 209.197783] usb 3-5: new high speed USB device using ehci_hcd and address 3
[ 209.343176] usb 3-5: configuration #1 chosen from 1 choice
[ 209.345244] scsi5 : SCSI emulation for USB Mass Storage devices
[ 209.368063] usb-storage: device found at 3
[ 209.368070] usb-storage: waiting for device to settle before scanning
[ 215.287874] scsi 5:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 215.296745] sd 5:0:0:0: [sdb] 156276912 512-byte hardware sectors (80014 MB)
[ 215.297495] sd 5:0:0:0: [sdb] Write Protect is off
[ 215.297499] sd 5:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 215.297503] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 215.303015] sd 5:0:0:0: [sdb] 156276912 512-byte hardware sectors (80014 MB)
[ 215.303832] sd 5:0:0:0: [sdb] Write Protect is off
[ 215.303836] sd 5:0:0:0: [sdb] Mode Sense: 08 00 00 00
[ 215.303840] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 215.303845] sdb:<6>sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 215.583105] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 215.888353] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 215.888353] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 216.261124] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 216.261124] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 216.261124] unknown partition table
[ 216.261124] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 216.261124] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 216.261184] usb-storage: device scan complete
[ 216.553482] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 216.553482] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 216.904131] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 216.904131] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 217.230144] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 217.230144] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 217.515617] sd 5:0:0:0: [sdb] Sense Key : 0x0 [current]
[ 217.515617] sd 5:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
[ 253.403340] usb 3-5: reset high speed USB device using ehci_hcd and address 3
[ 270.186882] sd 5:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
[ 270.186892] end_request: I/O error, dev sdb, sector 40
[ 270.186899] __ratelimit: 39 messages suppressed
[ 270.186902] Buffer I/O error on device sdb, logical block 5
[ 270.186908] Buffer I/O error on device sdb, logical block 6
[ 270.186912] Buffer I/O error on device sdb, logical block 7
[ 270.186916] Buffer I/O error on device sdb, logical block 8
[ 270.186920] Buffer I/O error on device sdb, logical block 9
[ 270.186924] Buffer I/O error on device sdb, logical block 10
[ 270.186928] Buffer I/O error on device sdb, logical block 11
[ 270.194069] usb 3-5: USB disconnect, address 3
[ 270.194804] sd 5:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00
[ 270.194813] end_request: I/O error, dev sdb, sector 156276904
[ 300.611626] usb 3-5: new high speed USB device using ehci_hcd and address 4
[ 300.729368] usb 3-5: configuration #1 chosen from 1 choice
[ 300.734974] scsi6 : SCSI emulation for USB Mass Storage devices
[ 300.742258] usb-storage: device found at 4
[ 300.742845] usb-storage: waiting for device to settle before scanning
[ 306.002680] scsi 6:0:0:0: Direct-Access USB 2.0 Storage Device 0100 PQ: 0 ANSI: 0 CCS
[ 306.009810] sd 6:0:0:0: [sdc] 156244144 512-byte hardware sectors (79997 MB)
[ 306.009811] sd 6:0:0:0: [sdc] Write Protect is off
[ 306.009811] sd 6:0:0:0: [sdc] Mode Sense: 08 00 00 00
[ 306.009811] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 306.015810] sd 6:0:0:0: [sdc] 156244144 512-byte hardware sectors (79997 MB)
[ 306.015876] sd 6:0:0:0: [sdc] Write Protect is off
[ 306.015879] sd 6:0:0:0: [sdc] Mode Sense: 08 00 00 00
[ 306.015881] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 306.015885] sdc:<6>sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 306.275864] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 306.542500] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 306.542500] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 306.792531] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 306.792542] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 306.792985] unknown partition table
[ 306.792985] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 306.792985] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 306.798018] usb-storage: device scan complete
[ 307.095353] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 307.095365] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 307.406725] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 307.406737] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 307.693544] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 307.693553] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.001745] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.001745] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.309951] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.309951] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.578830] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.578830] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 308.915038] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 308.915038] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 309.203257] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 309.203257] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 309.499458] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 309.499458] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 309.815746] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 309.815746] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
[ 310.125538] sd 6:0:0:0: [sdc] Sense Key : 0x0 [current]
[ 310.125538] sd 6:0:0:0: [sdc] ASC=0x0 ASCQ=0x0
Inutile de vous dire que ni le sdb ni le sdc promis par dmesg ci-dessus apparaissent (ou alors disparaissent aussi tot..)
Une autre démarche avant de le composter ?