Poster une réponse à un sujet: linux + wifi
Attention, ce sujet est un sujet ancien (6521 jours sans réponse)
ovh
Pourquoi ?
![:tinostar: :tinostar:](images/smileys/tinostar.gif)
![:topicalacon: :topicalacon:](images/smileys/topicalacon.gif)
Altar
Alors pour la solution à mon problème, c'est simple. J'ai du faire joujou avec le bios pour que la carte se retrouve toute seule sur un irq. C'est chiant mais j'ai réussi et là ça marche. Par contre, ne me demandez pas pourquoi, je ne suis pas dans le secret des dieux
![:itm: :itm:](images/smileys/itm.gif)
ovh
![:wam: :wam:](images/smileys/wam.gif)
![:write: :write:](images/smileys/write.gif)
Altar
Voilà c'est réglé
[ 72.003707] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 72.003748] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 72.003804] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 72.003842] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 72.003865] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 72.003903] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 72.003915] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 72.003927] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 72.003938] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 72.003949] wifi0: Use hw queue 8 for CAB traffic
[ 72.003960] wifi0: Use hw queue 9 for beacons
[ 72.030277] wifi0: Atheros 5212: mem=0xe7000000, irq=12
![:ddr555: :ddr555:](images/smileys/ddr555.gif)
[ 72.003707] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 72.003748] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 72.003804] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 72.003842] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 72.003865] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 72.003903] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 72.003915] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 72.003927] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 72.003938] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 72.003949] wifi0: Use hw queue 8 for CAB traffic
[ 72.003960] wifi0: Use hw queue 9 for beacons
[ 72.030277] wifi0: Atheros 5212: mem=0xe7000000, irq=12
Altar
vi rules
![:dawaaa: :dawaaa:](images/smileys/dawaaa.gif)
philfr
Altar> pareil... De toutes façons, chez moi il n'y a qu'un AP joignable: le mien.
Et ailleurs, je mets l'ESSID à "any" et il se connecte aux AP ouverts.
Si il y a une protection, comme je dois quand-même rentrer la clé etc, alors autant le faire dans le fichier de conf que dans une interface graphique...
xfce4 + rxvt + bash + vi rules
Et ailleurs, je mets l'ESSID à "any" et il se connecte aux AP ouverts.
Si il y a une protection, comme je dois quand-même rentrer la clé etc, alors autant le faire dans le fichier de conf que dans une interface graphique...
xfce4 + rxvt + bash + vi rules
![:oh: :oh:](images/smileys/oh.gif)
Altar
Moi je suis un geek, je fais tout en console
Comment ça c'est parce que j'ai pas de gui
![:oh: :oh:](images/smileys/oh.gif)
![:boidleau: :boidleau:](images/smileys/boidleau.gif)
philfr
Sinon j'ai trouvé ça: http://freshmeat.net/projects/giwconfig
philfr
C'est dans la version SVN: http://kwifimanager.sourceforge.net/html/sneak_peek__features.html
In the current KDE SVN development branch, which will become KDE 3.5, several new features have been added. Among these are:
* The "Scan for networks..." button now allows you to switch to the networks it has discovered. This works even for WEP encrypted networks, you can enter the WEP key in the results window
* The system tray icon is now transparent so that it fits nicely into arbitrary kicker skins. It has also been brushed up a little so that the numbers should never be so large that they obscure parts of the icon or become unreadable.
* A tooltip that tells the currently connected SSID has been added to the system tray icon
* The control center module attempts to auto-detect if you entered a hexadecimal or a string key
* Interface selection is now done per config, not globally in order to support more than one interface. It defaults to auto-detection to make things easier if only one interface is present
Ya plus qu'à compiler
Avec ma carte MSI, j'ai reçu un tool qui faisait ça aussi. Je vais voir ce soir si c'est un truc générique ou uniquement pour cette carte.
In the current KDE SVN development branch, which will become KDE 3.5, several new features have been added. Among these are:
* The "Scan for networks..." button now allows you to switch to the networks it has discovered. This works even for WEP encrypted networks, you can enter the WEP key in the results window
* The system tray icon is now transparent so that it fits nicely into arbitrary kicker skins. It has also been brushed up a little so that the numbers should never be so large that they obscure parts of the icon or become unreadable.
* A tooltip that tells the currently connected SSID has been added to the system tray icon
* The control center module attempts to auto-detect if you entered a hexadecimal or a string key
* Interface selection is now done per config, not globally in order to support more than one interface. It defaults to auto-detection to make things easier if only one interface is present
Ya plus qu'à compiler
![:oh: :oh:](images/smileys/oh.gif)
Avec ma carte MSI, j'ai reçu un tool qui faisait ça aussi. Je vais voir ce soir si c'est un truc générique ou uniquement pour cette carte.
blietaer
malheureusement pas.....
![:benou_mouton: :benou_mouton:](images/smileys/benou_mouton.gif)